Camaro Style


All of UB’s uppers come black powder coated to resist corrosion and are built with a medium alloy tube. There is no seamwelded tubing in our arms. 



14-0912-1&1/8L
14-0912-1&1/8R

Upper camaro 70-81
$
Parts Order Line: 260-493-3381


14-0938-15L
14-0938-15R

Upper Camaro 67-69
$
Parts Order Line: 260-493-3381

14-09029″ upper for stock ball joint 7-3/4″ inner shaft, small bolt pattern$
14-09229-1/2″ upper for stock ball joint 7-3/4″ inner shaft, small bolt pattern$
14-100210″ upper for stock ball joint 7-3/4″ inner shaft, small bolt pattern$

Parts Order Line: 260-493-3381



15-SERIES CAMARO STYLE UPPERS

Big bolt pattern
NOTE: 70-81 Camaro style uppers have 7-3/4″ steel inner shaft, will not fit 67-69 Camaro
$

LENGTHPART #
7″15-0702
7-1/4″15-0712
7-1/2″15-0722
7-3/4″15-0732
8″15-0802
8-1/4″15-0812
8-1/2″15-0822
8-3/4″15-0832
9″15-0902
9-1/4″15-0912
9-1/2″15-0922
9-3/4″15-0932
10″15-1002
NOTE:  ALL UB MACHINE UPPER CONTROL ARMS ARE MEASURED FROM THE CENTER OF THE INNER SHAFT TO THE CENTER OF THE BALL JOINT.

If you need a control arm that is not listed, please contact us for price and availability.  We manufacture special order A-arms to your specifications.  
(Special set-up charge will apply.)


15-0902-5RR
70-81 Camaro upper 9″ x 1-1/4″ offset to rear right side
Big bolt pattern
$

15-0932-5LR
70-81 Camaro upper 9-3/4″ x 1-1/4″ offset to rear left side
Big bolt pattern
$
Parts Order Line: 260-493-3381

Parts Order Line: 260-493-3381
24 Hour Fax: 260-493-4663

Chevelle Style


All of UB’s uppers come black powder coated to resist corrosion and are built with a medium alloy tube. There is no seamwelded tubing in our arms. 


Parts Order Line: 260-493-3381

19-0928-5L
Fits L/H 64-72 Chevelle frame
Screw-in ball joint, 9-1/2″ long, with 1-1/4″ offset
6-1/2″ inner shaft – Fits Dirtworks chassis
$

19-0908-5R
Fits R/H 64-72 Chevelle frame
Screw-in ball joint, 9″ long, with 1-1/4″ offset
6-1/2″ inner shaft – Fits Dirtworks chassis
$


Parts Order Line: 260-493-3381

14-092+1/8-6+1/8-L
14-092+1/8-6+1/8-R

Stock replacement tubular upper
Fits 68-72 Chevelle frame
9-5/8″ long with 1-5/8″ offset
6-1/2″ inner shaft
$

Parts Order Line: 260-493-3381
24 Hour Fax; 260-493-4663

Metric Chassis


All of UB’s uppers come black powder coated to resist corrosion and are built with a medium alloy tube. There is no seamwelded tubing in our arms. 


Parts Order Line: 260-493-3381
24 Hour Fax: 260-493-4663



14-XXXX-XX
Upper with metric ball joint – 6-7/8″ shaft –
Uses part #40-3203
$

14-0809-5R8″ x 1-1/4″ offsetRight
14-0809-6L8″ x 1-1/4″ offsetLeft
14-0829-6L8-1/2″ x 1-1/2″ offsetLeft
14-0909-6L9″ x 1-1/2″ offsetLeft
14-0929-6L9-1/2″ x 1-1/2″ offsetLeft
Parts Order Line: 260-493-3381

14-08+1/8-9-4R
14-08+1/8-9-4L

Stock replacement tubular upper – Fits 78 Metric frames
$142.45


15-0809-5R

15-0809-5R

Fits R/H GM metric chassis
Standard bolt-in ball joint (#40-3200), 8″ long, with
1-1/4″ offset, 6-7/8″ inner shaft
$
Parts Order Line: 260-493-3381

15-0829-6L

15-0829-6L

Fits L/H GM metric chassis
Standard bolt-in ball joint (#40-3200), 8-1/2″ long, with
1-1/2″ offset, 6-7/8″ inner shaft
$
Parts Order Line: 260-493-3381

19-0809-5R

19-0809-5R

Fits R/H GM metric chassis
Screw-in ball joint, 8″ long, with 1-1/4″ offset,
6-7/8″ inner shaft
$
Parts Order Line: 260-493-3381

19-0829-6L
Fits L/H GM metric chassis
Screw-in ball joint, 8-1/2″ long, with 1-1/2″ offset,
6-7/8″ inner shaft
$


Parts Order Line: 260-493-3381
24 Hour Fax: 260-493-4663

Pierce Chassis


All of UB’s uppers come black powder coated to resist corrosion and are built with a medium alloy tube. There is no seamwelded tubing in our arms. 


Parts Order Line: 260-493-3381
24 Hour Fax: 260-493-4663

15-093-1/8-9-6L-WSP
Fits L/H Pierce pre-2006 chassis
Bolt-in ball joint, 9-7/8″ long, with 1-1/2″ offset
6-7/8″ inner shaft
$

15-10-1/8-9-6L-WSP
Fits L/H Pierce 2007 and up chassis
Bolt-in ball joint, 10-1/8″ long, with 1-1/2″ offset
6-7/8″ inner shaft
$


Parts Order Line: 260-493-3381

15-0709-5

Fits R/H Pierce pre-2006 chassis
Bolt-in ball joint, 7″ long, with 1-1/4″ offset
6-7/8″ inner shaft
$
Parts Order Line: 260-493-3381

Parts Order Line: 260-493-3381
24 Hour Fax: 260-493-4663

STREET ROD UPPER CONTROL ARMS


STREET ROD UPPER CONTROL ARMS – Come Black Powder Coated

All of UB’s uppers come black powder coated to resist corrosion and are built with a medium alloy tube. There is no seamwelded tubing in our arms. 

Our street rod style uppers are manufactured
with a small screw-in ball joint. 8″ long available
with a 4-1/2″ or 5″ inner shaft.

71-73 Pinto style shaft (4-1/2″)
*TEFLON BUSHINGS

71-73 Pinto style shaft (4-1/2″)

19-0805$
*19-0805-T$

*TEFLON BUSHINGS


Parts Order Line: 260-493-3381
24 Hour Fax ; 260-493-4663

ADJUSTABLE UPPER ARMS


Adjustable uppers are available for Lefthander, Moon, Dirtworks, GRT, and Shaw style chassis. They are manufactured with a screw-in ball joint, 5/8″ threads.

Parts Order Line: 260-493-3381
24 Hour Fax: 260-493-4663


PART #DESCRIPTIONPRICE
47-10005/8″ clevis$
40-3202ball joint$

Lefthander chassis

Lefthander chassis
Parts Order Line: 260-493-3381
22-0150R/H$
22-0160L/H$

Moon chassis

Moon chassis
Parts Order Line: 260-493-3381
22-0155R/H$
22-0165L/H$

Dirtworks chassis

GRT and Shaw chassis
22-0170R/H$
22-0175L/H$

GRT and Shaw chassis

Dirtworks chassis
Parts Order Line: 260-493-3381
22-0156R/H$
22-0156L/H$

Adjustable Upper Arms Parts

55-0265
Upper control arm mounting bracket – 5/8″ hole
Parts Order Line: 260-493-3381

999-5621-043
Tapered spacer 5/8″ ID x 7/16″ long – steel
Parts Order Line: 260-493-3381

Parts Order Line: 260-493-3381
24 Hour Fax: 260-493-4663

HEIM JOINT UPPER CONTROL ARMS

All of UB’s uppers come black powder coated to resist corrosion and are built with a medium alloy tube. There is no seamwelded tubing in our arms. 


*Heim joint lightweight uppers do NOT come with the heim. Heims are available separately.

Parts Order Line: 260-493-3381
24 Hour Fax: 260-493-4663
22-0115
“Dwarf car” style upper control arm
Uses Chevette ball joint
$
Parts Order Line: 260-493-3381

NOTE: All UB Machine upper control arms are measured from the center of the inner shaft
to the center of the ball joint.

Bolt-in ball joint
Part #LengthThreadPrice
22-01208-1/4″1/2″$
22-01219-1/4″1/2″$
22-01308-1/4″5/8″$
22-01316-3/4″5/8″$
22-01409-1/4″5/8″$

Screw-in ball joint
Part #LengthThreadPrice
22-01358-1/4″5/8″$
22-01366-3/4″5/8″$
22-01419-1/4″5/8″$
Parts Order Line: 260-493-3381

22-SERIES UPPER CONTROL ARM PARTS

Part #DescriptionPrice
40-3200Bolt-in ball joint$
40-3202Screw-in ball joint$
40-0811R/H 1/2″ heim$
40-1011R/H 5/8″ heim$
40-1211R/H 3/4″ heim$
999-3507-025Step spacer 1/2″ ID x 3/4″ step x 1/4″ flange (4 required)$

Parts Order Line: 260-493-3381
24 Hour Fax: 260-493-4663

UPPER CONTROL ARMS

15 -16- 19-XXXX-A INNER SHAFT STYLE CONTROL ARMS – FOR HIGH-MISALIGNMENT MONOBALL

16- XXXX-A SERIES WITH 5/8″ MONOBALL PART NUMBERS

LENGTHALUMINUM SHAFT STEEL SHAFT
6-1/2″16-0620-A16-0624-A
6-3/4″16-0630-A16-0634-A
7″16-0700-A16-0704-A
7-1/4″16-0710-A16-0714-A
7-1/2″16-0720-A16-0724-A
7-3/4″16-0730-A16-0734-A
8″16-0800-A16-0804-A
8-1/4″16-0810-A16-0814-A
8-1/2″16-0820-A16-0824-A
8-3/4″16-0830-A16-0834-A
9″16-0900-A16-0904-A
9-1/4″16-0910-A16-0914-A
9-1/2″16-0920-A16-0924-A
9-3/4″16-0930-A16-0934-A
10″16-1000-A16-1004-A
10-1/4″16-1010-A16-1014-A
10-1/2″16-1020-A16-1024-A
10-3/4″16-1030-A16-1034-A
11″16-1100-A16-1104-A

NOTE:  ALL UB MACHINE UPPER CONTROL ARMS ARE MEASURED FROM THE CENTER OF THE INNER SHAFT TO THE CENTER OF THE BALL JOINT.

If you need a control arm that is not listed, please contact us for price and availability. We manufacture special order A-arms to yourspecification. (Special set-up charge will apply.)

16-A SERIES UPPER CONTROL ARM PARTS
40-4185-ABall joint stud
adapter
47-10855/8″ monoball high misalignment
48-5137Snap ring

INNER SHAFT STYLE CONTROL ARMS -SLOTTED INNER SHAFT

  
All of UB’s uppers come black
powder coated to resist corrosion and are built with a medium alloy tube. There is no seamwelded
tubing in our arms.
16-XXXX-A
Monoball upper, 9-1/2″ long, 5/8″
monoball
Slotted shaft in aluminum or steel
Allows you to use caster slugs to set multi-caster settings using the same
control arm
(Slugs sold separately)
16-XXX1-A (ALUMINUM) 16-XXX3-A (STEEL)
16-XXX1-A and 16-XXX3-A SLOTTED PART NUMBERS (ANY LENGTH
AVAILABLE)
LENGTHALUMINUM SHAFT STEEL SHAFT
6-1/2″16-0621-A16-0623-A
7″16-0701-A16-0703-A
7-1/4″16-0711-A16-0713-A
7-1/2″16-0721-A16-0723-A
7-3/4″16-0731-A16-0733-A
8″16-0801-A16-0803-A
8-1/4″16-0811-A16-0813-A
8-1/2″16-0821-A16-0823-A
8-3/4″16-0831-A16-0833-A
9″16-0901-A16-0903-A
9-1/4″16-0911-A16-0913-A
9-1/2″16-0921-A16-0923-A
9-3/4″16-0931-A16-0933-A
10″16-1001-A16-1003-A
10-1/4″16-1011-A16-1013-A
10-1/2″16-1021-A16-1023-A
10-3/4″16-1031-A16-1033-A
11″16-1101-A16-1103-A

NOTE: ALL UB MACHINE UPPER CONTROL ARMS ARE MEASURED FROM THE CENTER OF THE INNER SHAFT TO THE CENTER OF THE BALL JOINT.

If you need a control arm that is not listed, please contact us for price and availability. We manufacture special order A-arms to your specification. (Special set-up charge will apply.)

INNER SHAFT STYLE CONTROL ARMS – FOR SCREW-IN BALL JOINT


All of UB’s uppers come black
powder coated to resist corrosion 
and are built with a medium alloy
tube. There is no seamwelded
tubing in our arms.
19-SERIES
6″ center-to-center on crosshaft
Aluminum or steel inner shaft
Uses part #40-3202 ball joint
Small Chrysler screw-in ball joint19-XXX0 (ALUMINUM) 19-XXX4 (STEEL)
19-SERIES PART NUMBERS
LENGTHALUMINUM SHAFTSTEEL SHAFT
6-1/4″19-061019-0614
6-1/2″19-062019-0624
6-3/4″19-063019-0634
7″19-070019-0704
7-1/4″19-071019-0714
7-1/2″19-072019-0724
7-3/4″19-073019-0734
8″19-080019-0804
8-1/4″19-081019-0814
8-1/2″19-082019-0824
8-3/4″19-083019-0834
9″19-090019-0904
9-1/4″19-091019-0914
9-1/2″19-092019-0924
9-3/4″19-093019-0934
10″19-100019-1004
10-1/4″19-101019-1014
10-1/2″19-1020191024
10-3/4″19-103019-1034
11″19-110019-1104

NOTE: ALL UB MACHINE UPPER CONTROL ARMS ARE MEASURED FROM THE CENTER OF THE INNER SHAFT TO THE CENTER OF THE BALL JOINT.

If you need a control arm that is not listed, please contact us for price and availability. We manufacture special order A-arms to your specification. (Special set-up charge will apply.)

OFFSET UPPERS –
STEEL SHAFT
19-0734-57-3/4″ x 1-1/4″ offset
19-0834-58-3/4″ x 1-1/4″ offset
19-0904-59″ x 1-1/4″ offset
19-0914-59-1/4″ x 1-1/4″ offset
19-0924-59-1/2″ x 1-1/4″ offset
19-SERIES (SCREW-IN BALL JOINT) UPPER CONTROL ARM PARTS
15-0010Inner shaft 6″
aluminum
15-0014Inner shaft 6″ steel
15-0015Inner shaft 4-1/2″ steel (71-73 Pinto)
15-0016Inner shaft 5″ steel
(74-up Mustang)
15-0017Inner shaft 5-1/2″ steel
15-0018Inner shaft 6-1/2″ steel (64-72 Chevelle/67-70 Camaro)
15-0019Inner shaft 6-7/8″ steel (78 & up GM Metric, S-10)
15-0022Inner shaft 7-3/4″ steel (70-81 Camaro/73-77
Chevelle)
40-3202Ball joint (MOOG #K772)
40-3303Ball joint sleeve
990-7516-5Nut for inner shaft
999-2000Grease zerk
999-5751-140Bushing inner shaft

INNER SHAFT STYLE CONTROL ARMS – SLOTTED INNER SHAFT


All of UB’s uppers come black
powder coated to resist corrosion 
and are built with a medium alloy
tube. There is no seamwelded
tubing in our arms.
19-XXXX
Upper for screw-in ball joint
Slotted shaft in aluminum or steel
Allows you to use caster slugs to set multi-caster settings using the same control arm
(Slugs sold separately)
19-XXX1 (ALUMINUM) 19-XXX3
(STEEL) 19-XXX1-NB
Screw-in ball joint upper with slotted steel inner shaft for needle bearing pivot bushing

19-XXX1 and 19-XXX3 SLOTTED PART NUMBERS (ANY LENGTH AVAILABLE)

LENGTHALUMINUM SHAFT STEEL SHAFT
6-1/2″19-062119-0623
6-3/4″19-063119-0633
7″19-070119-0703
7-1/4″19-071119-0713
7-1/2″19-072119-0723
7-3/4″19-073119-0733
8″19-080119-0803
8-1/4″19-081119-0813
8-1/2″19-082119-0823
8-3/4″19-083119-0833
9″19-090119-0903
9-1/4″19-091119-0913
9-1/2″19-092119-0923
9-3/4″19-093119-0933
10″19-100119-1003
10-1/4″19-101119-1013
10-1/2″19-102119-1023
10-3/4″19-103119-1033
11″19-110119-1103

INNER SHAFT STYLE CONTROL ARMS – FOR BOLT-IN BALL JOINT


All of UB’s uppers come black
powder coated to resist

corrosion and are built with a
medium alloy tube. There is no 
seamwelded tubing in our arms. 
15-SERIES
6″ center-to-center on crosshaft 
Inner shaft in alumnium or steel
Uses part #40-3200 ball joint
Large GM bolt-in ball joint15-XXX0 (ALUMINUM) 15-XXX4 (STEEL)

Please note:  UB Machine does not have the resources nor space available to stock every conceivable upper that we are capable of building.  Part numbers are listed as a convenience to our customers and to ensure order accuracy.  A part number  in our catalog does not imply that the part is necessarily in stock, only that we  can build it.  Please ask your sales representative about stock status when 
placing your order.

15-SERIES PART
NUMBERS
LENGTHALUMINUM SHAFT STEEL SHAFT
6-1/4″15-061015-0614
6-1/2″15-062015-0624
6-3/4″15-063015-0634
7″15-070015-0704
7-1/4″15-071015-0714
7-1/2″15-072015-0724
7-3/4″15-073015-0734
8″15-080015-0804
8-1/4″15-081015-0814
8-1/2″15-082015-0824
8-3/4″15-083015-0834
9″15-090015-0904
9-1/4″15-091015-0914
9-1/2″15-092015-0924
9-3/4″15-093015-0934
10″15-100015-1004
10-1/4″15-101015-1014
10-1/2″15-102015-1024
10-3/4″15-103015-1034
11″15-110015-1104

OFFSET UPPERS – STEEL SHAFT
8-3/4″ x 1-1/4″ offset15-0834-5R
8-3/4″ x 1-1/4″ offset15-0834-5L
9-1/4″ x 1-1/4″ offset15-0914-5R
9-1/4″ x 1-1/4″ offset15-0914-5L
9-1/4″ x 1-1/2″ offset15-0914-6R
9-1/4″ x 1-1/2″ offset15-0914-6L
9-1/2″ x 1-1/4″ offset15-0924-5R
9-1/2″ x 1-1/4″ offset15-0924-5L
15-1020-HS
10-1/2″ Upper for bolt-in ball joint
6″ wide aluminum inner shaft
Wide, with heim joint pivots

INNER SHAFT STYLE CONTROL ARMS – SLOTTED INNER SHAFT


All of UB’s uppers come black powder 
coated to resist corrosion and are

built with a medium alloy tube. There is no seamwelded tubing in our arms.
15-SERIES
Ball joint plated upper – slotted shaft
Aluminum or steel
Allows you to use caster slugs to setmulti-caster settings using the samecontrol arm
(Slugs sold separately)

15-XXX1 (ALUMINUM)

15-XXX3 (STEEL) 15-XXX3-NB

Bolt-in ball joint upper with slotted steel inner shaft for needle bearing pivot bushing

15-XXX1 AND 15-XXX3 SLOTTED PART NUMBERS
(ANY LENGTH AVAILABLE)
LENGTHALUMINUM SHAFT STEEL SHAFT
6-1/2″15-062115-0623
7″15-070115-0703
7-1/4″15-071115-0713
7-1/2″15-072115-0723
7-3/4″15-073115-0733
8″15-080115-0803
8-1/4″15-081115-0813
8-1/2″15-082115-0823
8-3/4″15-083115-0833
9″15-090115-0903
9-1/4″15-091115-0913
9-1/2″15-092115-0923
9-3/4″15-093115-0933
10″15-100115-1003
10-1/4″15-101115-1013
10-1/2″15-102115-1023
10-3/4″15-103115-1033
11″15-110115-1103

NOTE: ALL UB MACHINE UPPER CONTROL ARMS ARE MEASURED FROM THE CENTER OF THE INNER SHAFT TO THE CENTER OF THE BALL JOINT.
If you need a control arm that is not listed, please contact us for price and availability. We manufacture special order A-arms to your specification. (Special set-up charge will apply.)

INNER SHAFT STYLE CONTROL ARMS – WIDE SPLIT PLATE


All of UB’s uppers come black powder 
coated to resist corrosion and are

built with a medium alloy tube. There
is no seamwelded tubing in our arms.
15-XXXX-WSP
Wide split plate upper for bolt-in ball joint With twin plates which
separate to allow mounting
around chassis 6″ aluminum or stell inner shaft (wide)
15-XXX0-WSP (ALUMINUM)

15-XXX4-WSP (STEEL)
WIDE SPLIT PLATE UPPER PART NUMBERS
LENGTHALUMINUM SHAFT
STEEL SHAFT
10″15-1000-WSP15-1004-WSP
10-1/4″15-1010-WSP15-1014-WSP
10-1/2″15-1020-WSP15-1024-WSP
10-3/4″15-1030-WSP15-1034-WSP
11″15-1100-WSP15-1104-WSP
11-1/4″15-1110-WSP15-1114-WSP
11-1/2″15-1120-WSP15-1124-WSP*
11-3/4″15-1130-WSP15-1134-WSP*
12″15-1200-WSP*15-1204-WSP*
*NOT STOCK ITEMS AT THIS TIME

INNER SHAFT STYLE CONTROL ARMS – WIDE SPLIT PLATE – SLOTTED


All of UB’s uppers come black powder 
coated to resist corrosion and are

built with a medium alloy tube. There
is no seamwelded tubing in our arms.
15-XXX0-WSP
Wide split plate upper for bolt-in ball joint With twin plates which
separate to allow mounting
around chassis 6″ aluminum or stell inner shaft (wide)
15-XXX1-WSP (ALUMINUM)

15-XXX3-WSP (STEEL)
SLOTTED WIDE SPLIT PLATE UPPER PART
NUMBERS
LENGTHALUMINUM SHAFT
STEEL SHAFT
10″15-1001-WSP15-1003-WSP
10-1/4″15-1011-WSP15-1013-WSP
10-1/2″15-1021-WSP15-1023-WSP
10-3/4″15-1031-WSP15-1033-WSP
11″15-1101-WSP15-1103-WSP
11-1/4″15-1111-WSP15-1113-WSP
11-1/2″15-1121-WSP15-1123-WSP*
11-3/4″15-1131-WSP15-1133-WSP*
12″15-1201-WSP*15-1203-WSP*
*NOT STOCK ITEMS AT THIS TIME

NOTE: ALL UB MACHINE UPPER CONTROL ARMS ARE MEASURED FROM THE CENTER OF THE INNER SHAFT TO THE CENTER OF THE BALL JOINT.


If you need a control arm that is not listed, please contact us for price and availability. We manufacture special order A-arms to you rspecification. (Special set-up charge will apply.)

Parts Order Line : 260-493-3381
24 Hour Fax : 260-493-4663